Details：
First, the major component of the equipment
1, rack
2, the injection of glue gun drive
3, place glue gun drive
4, computer control box
5, hot melt machine
Second, technical parameters
1, capacity: 3 ~ 5 / min
2, air filter length: ≤ 950mm
3, air filter diameter:> Φ100mm
4, the host power supply voltage: 220V/50HZ
5, Working pressure: 0.6MPa
6, plastic machine power supply voltage: 380V/50HZ
7, hot melt adhesive machine capacity: 10kg
8, hot melt adhesive heating power machine: 6kw
9, the host power: 1kw
10, Machine Weight: 450kg
11, plastic machine size: 800 × 600 × 1400mm (L × W × H)
12, the host size: 3200 × 850 × 1500mm (L × W × H)
Third, the main characteristics of
1, linear filter pouring hot melt adhesive, the big empty can in the larger air filter, under pressure from both inside and outside the care network and the filter paper has a fixed position in the original
2, filter pouring hot melt adhesive, can prevent the filter paper resulting from compression between the paper and paper-free clearance to avoid increasing resistance
3, this machine can be different according to the products through the PLC program and computer control to adjust the product from the plastic can be cast spiral ring and two casting circle
4, injection of glue can be adjusted through the electrical appliances that will enable both inside and outside the circle of plastic injection at the same time or separately, to run a smooth
5, it has two types of automatic and manual functions
Fourth, the scope of application
It mainly used for large-scale circular and conical air filter linear pouring hot melt adhesive